928
Manual
Transmission/Controls,
Case
34
ADJUSTING
SHIFT
FORKS
Note
Insert locking sleeve and spring for no-play
arrest of 2nd and 3rd gear rod and move to
correct installed
position
with a locally
manufactured
holder.
c
A = Locally
manufactured
holder made of
10 x 20 x 45 mm flat steel, with
6.5 mm dia. mounting
hole and 2.5 mm
chamfer in area of locking sleeve.
1. Adjust operating
sleeves with the shift
l
forks that they are exactly
in the middle
between synchromesh
rings in neutral
position.
2. Tighten
mounting
bolts with torque of
25 Nm (18 ftlb).
Note
Deviations
in adjustments
must be
corrected
after checking
the shifting,
since
perfect synchronization
depends on this.
Printed
in Germany
. X, 1984
Adjusting
Shift Forks
34-215