Porsche 928 Workshop Manual page 669

30
Clutch, Controls
928
a
CROSS REFERENCE OF ORIGINAL AND CHANGED/PRESENT PARTS
Part Description
Original Version Changed/Present Version
1. Clutch disc I
(front)
928.116.011.23
Liners riveted tight on both sides
with each rivet.
Without gap between liners.
Slight liner spring load
IO.0 0.4 mm)
Hub length: 20 mm
2. Clutch disc II
(I-Z?tW)
928.116.011.24
Liner springs with each 2 spring
plates
(0.85 1.15 mm)
Hub length: 20 mm
928.116.011.27 or 928.116.011.33
Liners riveted alternately with
only every second rivet.
Gap between liners.
Liner spring load
(0.5 0.8 mml
Hub length: 20 mm
928.116.011.28 or928.116.011.34
Liner springs with each 1 spring
plate
(0.5 0.8 mm)
Hub length: 29 mm
Note:
Disc with a hub length of 25 mm
were used a short time. They also
belong to new version.
30-14
Disassembling and Assembling Clutch
(Dowel Pin Centered1
Printed in Germany