Bleeding Clutch - Porsche 928 Workshop Manual

928
Clutch. Controls
30
0
BLEEDING CLUTCH
General Information
An electric bleeder is recommended for fast and accurate bleeding
1. Fill tank to upper edge with brake fluid. Remove
4. Install slave cylinder and repeat bleeding
strainer. Connect bleeder.
procedures.
I
r
2. Turn on bleeder and open bleeder screw on clutch
slave cylinder until escaping fluid is without air
bubbles. Depress clutch pedal several times during
this step.
3. If necessary (air still in system/operating travel too
Press push rod into slave cylinder against stop and
release again slowly (bleeder switched off/tank not
filled to edge). This will force back remaining air
into the clutch line or master cylinder/tank.
Note
Never operate clutch pedal as long as slave cylinder is
removed.
a
Printed in Germany
VI. 1982
Bleeding Clutch
30.2a