Clutch Linkage Versions - Porsche 928 Workshop Manual

30
Clutch, Controls
928
a
CLUTCH LINKAGE VERSIONS
The following modifications have been made to the clutch linkages since the beginning of production.
- Ball stud (no. 3) for release lever changed from 10 mm dia. to 19 mm dia.
- Release lever fitted with plastic bushing (no. 2) to take ball stud.
- Release bearing (no. 5) with vulcanized rubber pads to suppress noise and prevent turning.
Part Description
1 Release lever
2 Bushing
3 Ball stud
(see page 30 - 21)
4 Washer
5 Release bearing
Original Version *
b = small width
--- (snap ring)
10 mm dia.
Without turning lock
b = large width
Available
19 mm dia.
Available. Ball socket bushing
not available for version 2
(see page 30 - 21)
With vulcanized rubber pads as
turning locks (won't fit in release
lever of original version)
l
Parts no longer available. When replacing all parts of either the original or present version
must be installed.
30.20 Clutch Linkage Versions
VI, 1982 - Printed in Germany