Porsche 928 Workshop Manual page 884

39
DlfferentiaI,transaxlesystem 926
20. Screw out pan-head screw for clamping
sleeve and mounting bolts for driver plate
22. Unscrew lower monting screws for clutch
housing
21. Press out vacuum line from retaining clips
and pull of hose.
23. Pull back central tube with transmission
slightly and lower with universal transmis-
sion jack.
Note
Two persons will be required to remove can-
tral tube.
Note
To avoid placing the driver plate of the fly-
wheel under strain, start by tightening the six
driver plate bolts and only tighten the pan-
head screw of the clamping sleeve afterwards.
1. Note specified tightening torque values.
2. Adjust selector lever and control pressure
cables.
39 - 46 Removing and installlng central tube (autom. transmiss.)
a
Printed in Germany - XXIX,1992