Porsche 928 Workshop Manual page 776

37
Automaric Transmission / Controls, Case
928
12. Remove pressure pins for B 1 and 8 2.
Mark pressure pins for reinsrallation
Ld
14. Remove adjusting screw B 3 and take out both
l
pressure pins.
15. Remove brake band B 3 forward
16. Pull input shaft out of gear assembly
A - Pressure pins
13. Swing transmission in assembly stand to
horizonral position.
17. Hold brake band B 1 on the drum with a snap
ring from cover of brake band B 2 piston and
remove gear assembly with brake bands.
-*I- .- .---w- -
18. Drive out outpur shaft with a plastic hammer.
37 - 40
Disassembling and Assembling Transmission
Printed in Germany