Porsche 928 Workshop Manual page 453

25
Fuel System
928
Installing
1. Always use new seals and gaskets.
2. Tighten hex. head bolts on mixture control
unit crosswise to 1, 0 mkg (7 ft lb).
3. Tighten hex. head bolts with spring (in area
of sensor plate lever bearings) to compressed
length of spring and then loosen by one turn.
4. Tighten fuel lines and intake pipes to speci-
fied torque.
l
25 - 16
Removing and Installing
Printed in Germany
Mixture Control Unit