Porsche 928 Workshop Manual page 691

928
Manual Transmission/Controls. Case
34
REMOVING AND INSTALLING TRANSMISSION
Removing
5. Remove battery (only for cars with bolted bat-
tery console).
1. Disconnect ground strap at battery.
2. Loosen rear wheels. Engage 5rh gear.
6. Turn one rear wheel (holding wheel on opposite
side) to position coupling bolt between input
shaft and drive shaft, and remove bolt.
3. Loosen parking brake cable at connecror.
Unscrew locknut and pull out cable toward
rear (only for cars with welded battery console).
1
.-
r
4. Remove nuts on spring struts in luggage com-
parrment.
7. Move shift lever IO neutral and remove rear
wheels.
8. Detach brake calipers and suspend on wire so
that brake hoses are without tension.
9, Remove exhaust assembly after catalytic con-
verter and remove hear shield.
Printed inGermany - IV. 1980
Removing and lnsralling Transmission 34- 5