Removing And Installing Distributor - Porsche 928 Workshop Manual

28
Ignition System 928
a
REMOVING AND INSTALLING DISTRIBUTOR
1. Set cylinder 1 at TDC.
2. Remove distributor cap. rotor and dust cap.
Detach vacuwn hoses and wires.
3. Unscrew mounting bolt and remove distributor.
4 When installing the distributor rotor make sure
that it faces the cylinder 1 mark on distributor
housing.
a
5. Adjust ignition timing.
a
a
28 - 8
Removing and installing Distributor
Printed in Germany