Porsche 928 Workshop Manual page 699

928
Manual TransmirsionlControls, Case
34
4. Adjust shift to guarantee correct shift travel.
Keep to the order of selector lever axial and then
lateral inclination.
The adjustment differs according to the mounting
of the bracket. It is bolted on the central tube or
body.
cl Adjust selector lever lateral inclination. With
transmission in neutral position turn bearing
unit anticlockwise against stop and hold.
Turn selector rod with selector lever until the
selector lever is inclined to the left by 2 to 3".
Clamp selector rod flush with the bearing unit
in this position (arrow = forward direction).
Bracket Mounted on Central Tube
(Present Version1
a
a) Place insulation sheet on central tube and mount
bracket (guide tube mount) on the central tube.
a
b) With transmission in neutral position push selector
rod on to bearing unit (selector rod coupling)
against the stop.
,'T.
\
---$--J&v&'r' @s i' +
+&, -: _I.
[ x-.; ;-. -jr;
Printed in Germany
VI, 1982 Disassembling and Assembling Selector Linkage
34.89