Porsche 928 Workshop Manual page 132

13
Engine,
Crankshaft. Pistons
92.8
INSTALLING UPPER AND LOWER CRANKCASE SECTIONS
1. Apply a thin coat of Loctite 513 on crankcase
lower section.
5. Tighten mounting nuts to final torque. See
page 10 - 03 for specified torques and instruc-
tions .
Tighten to sequence.
2. Install crankcase lower section.
3. Install mounting nuts by hand.
4. Install oil pump body. lightening first both
upper bolts to specified torque.
Note
This is how crankcase upper and lower sections
are located in longitudinal direUion.
6. Mount upper section on engine holder after
tightening nuts.
7. Remove oil pump body.
13 - 10 Installing Upper and Lower Crankcase Sections Printed in Germany