Di And Do Signal Specified By Users - Delta ASDA-B2-F Series User Manual

Wiring
3.3.4
If the default setting of DI/DO does not fulfill the requirement for the application, users can
3
manually define the DI/DO signal. The signal function of DI 1 ~ 5, and DO1 ~ 2 is determined by
parameter P2-10 ~ P2-14 and parameter P2-18 ~ P2-19 respectively. Please refer to the
following table. Enter DI or DO code in the corresponding parameter to set up DI/DO.
Signal Name
Standard
DI
3-20

DI and DO Signal Specified by Users

Corresponding
Pin No
Parameter
DI1- CN1-1
DI2- CN1-2
DI3- CN1-3
DI4- CN1-4
DI5- CN1-5
Signal Name
P2-10
P2-11
Standard
P2-12
DO
P2-13
P2-14
Corresponding
Pin No
Parameter
DO1+ CN1-12
P2-18
DO1- CN1-13
DO2+ CN1-14
P2-19
DO2- CN1-15
- -
ASDA-B2-F
-
September, 2015