Notes; Ambient Conditions Of Storage; Ambient Conditions Of Installation - Delta ASDA-B2-F Series User Manual

Installation
2.1
Please pay special attention to the following:
2

Do not strain the cable connection between the servo drive and the servo motor.

Make sure each screw is tightened when fixing the servo drive.

The motor shaft and the ball screw should be parallel.

If the connection between the servo drive and the servo motor is over 20 meters, please
thicken the connecting wire, UVW as well as the encoder cable.

Tighten the four screws that fix the motor.
2.2
Before the installation, this product has to be kept in the shipping carton. In order to retain the
warranty coverage and for the maintenance, please follow the instructions below when storage, if
the product is not in use temporally:

Store the product in a dry and dust-free location.

Store the product within an ambient temperature range of -20°C to +65°C.

Store the product within a relative humidity range of 0% to 90% and a non-condensing
environment.

Avoid storing the product in the environment of corrosive gas and liquid.

It is better to store the product in the shipping carton and put it on the shelf or working
platform.
2.3
The most appropriate temperature of this servo drive is between 0°C and 55°C. If it is over
45°C, please place the product in a well-ventilated environment so as to ensure its performance.
If the product is installed in an electric box, make sure the size of the electric box and its
ventilation condition will not overheat and endanger the internal electronic device. Also, pay
attention to the vibration of the machine. Check if the vibration will influence the electronic device
of the electric box. Besides, the ambient conditions should be:

No over-heat device.

No water drop, vapor, dust or oily dust.

No corrosive and inflammable gas or liquid.

No airborne dust or metal particles.

With solid foundation and no vibration.

No interference of electromagnetic noise.
2-2

Notes

Ambient Conditions of Storage

Ambient Conditions of Installation

ASDA-B2-F
September, 2015