Wiring
3.3.3
When the drive connects to inductive load, the diode has to be installed. (The permissible current
3
is under 40 mA. The surge current is under 100 mA.)
C1: Wiring of DO signal. The servo drive applies to
the external power and the resistor is general load.
DOX: (DOX+,DOX-)
X = 1,2
DO1: (12,13)
DO2: (14,15)
Input signal via relay or open-collector transistor
NPN transistor, common emitter (E) mode (SINK mode)
C3:The wiring of DI. The servo drive applies to the external power.
3-18
Wiring Diagrams (CN1)
Servo Drive
DOX+
24 V
DC
DOX-
50 mA
24 V
DC
C2: Wiring of DO signal. The servo drive applies to
the external power and the resistor is inductive
load.
Servo Drive
DOX: (DOX+, DOX-)
X = 1,2
R
24 V
DC
DO1: (12,13)
DO2: (14,15)
Servo Drive
COM+
Approx. 4.7 KΩ
SON
ASDA-B2-F
Ensure the polarity (+, -)
of diode is correct or it
may damage the drive.
24 V
DC
DOX+
DOX-
September, 2015