Cabinet Base Drilling And Cutout Pattern; Drilling The Floor - Avaya Media Processing Server 1000 Hardware Installation And Maintenance

Installing Hardware and Connectivity

Cabinet Base Drilling and Cutout Pattern

Drilling the Floor

The following tools are required to drill the holes for the anchor bolts:
1. dark marking pencil
2. center-punch
3. rotary hammer drill
4. carbide-tip drill bit: 18 mm diameter.
5. blowout bulb or compressed air source
6. hammer or mallet
7. vacuum cleaner
Note:
The following description applies only to installations into concrete floors.
1. Using the equipment room floor plan, mark the position of the brackets.
2. Center-punch each of the hole centers.
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
42
Comments? infodev@avaya.com
October 2014