Maintenance
Replacing a Terminal Server
There are no field serviceable parts on a Terminal server. Replace the whole unit.
1. Disconnect the cables from the Terminal Server. (Make a note of the configuration before
you unplug.)
2. Remove the retaining screws.
3. Slide a new unit into the rack and reuse the retaining screws.
4. Configure the new Terminal Server. Refer to
Replacing a Cooling Fan
Cooling Fans are hot-swappable. You do not need to shut the MPS system down to replace a fan.
1. Turn off the power to the fan.
2. Remove the fan and replace with a new unit.
3. Turn the power back on.
Replacing an Ethernet Switch
Ethernet Switches are hot-swappable. You do not need the shut the MPS system down.
Refer to the installation procedures in the Avaya Business Policy Switch (BPS) 2000 Configuration
Manual.
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
232
Configuring the Terminal Server
Comments? infodev@avaya.com
on page 94.
October 2014