Installing Cables On The Back Of The Option 11C Mini Cabinet; Introduction - Avaya CallPilot 201i Hardware Installation

Installing cables on the back of the Option 11C Mini cabinet

Introduction

The following items connect to the back of the Option 11C Mini cabinet:
• multi I/O cable (NTRH0912)
• Option 11C Mini power cord with two ferrites
You must connect the multi I/O cable first before connecting the power cord, because the power
cord routes over the multi I/O cable connection.
To connect the cables
1. On the rear of the Option 11C Mini cabinet, locate the connector associated with
2. Connect the NTRH0912 multi I/O cable as follows:
®
Avaya CallPilot 201i Server Hardware Installation
the first slot occupied by the 201i server.
a. Loosen the connector's Velcro fastening strap.
b. Connect the amphenol connector on the NTRH0912 multi I/O cable to
the connector on the back of the Option 11C Mini cabinet.
c. Secure the connection by tightening the retaining screw and Velcro
fastening strap of the connector.
The following diagram shows how to secure the multi I/O cable connection:
Installing cables on the back of the Option 11C Mini cabinet
December 2010 71