Replacing A Windows Server; Replacing A Sparc Based Server - Avaya Media Processing Server 1000 Hardware Installation And Maintenance
Hide thumbs
Also See for Media Processing Server 1000:
- Reference (700 pages) ,
- Manual (570 pages) ,
- Configuration manual (350 pages)
Table of Contents
Advertisement
Replacing a Windows Server
Tools required:
1. Phillips screwdriver.
Procedure:
1. Disconnect all cables and power cord from rear of unit.
2. Loosen the two retaining screws and slide unit out on rails
3. Replace with new unit.
4. Replace retaining screws and reconnect all cables.
Figure 65: Windows Server Front View
Replacing a Sparc Based Server
Tools required:
1. Flat blade screwdriver
Procedure:
1. Disconnect all cables and power cord from rear of unit.
2. Loosen the two retaining screws and slide unit out on rails.
3. Replace with new unit.
4. Replace retaining screws and reconnect all cables.
Figure 66: Sparc based Server Front View
October 2014
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
Comments? infodev@avaya.com
Replacing a Windows Server
231
Advertisement
Table of Contents
Need help?
Do you have a question about the Media Processing Server 1000 and is the answer not in the manual?