Chapter 5: System Validation
This chapter covers:
1. Hardware Validation
2. Server Management
Hardware Validation
Field Factory Test
Field factory diagnostic tests verify the operation of an MPS 1000 platform. The field factory test is a
series of test applications and configuration files used to test the MPS 1000 hardware and software
components at the system level.
FFT for specific platforms and hardware configurations are located in $MPSHOME/PERIfft/fftests.
The FFT scripts are in the following locations.
Field Factory Test
$MPSHOME/PERIfft/fftests/oscar
$MPSHOME/PERIfft/fftests/mps/mps500/e1test
$MPSHOME/PERIfft/fftests/mps/mps500/t1test
$MPSHOME/PERIfft/fftests/mps/mps500/tpm
$MPSHOME/PERIfft/fftests/mps3/mps1000/e1test
$MPSHOME/PERIfft/fftests/mps3/mps1000/t1test
$MPSHOME/PERIfft/fftests/mps3/mps1000/tpm
Field Factory Test Documentation
To determine which tests to use, refer to the following table for the documentation specific to the
platform and hardware configuration. The documentation is in $MPSHOME/PERIfft/fftests/docs.
October 2014
Avaya Media Processing Server 1000 Hardware Installation and Maintenance
Comments? infodev@avaya.com
Supported Platform
OSCAR/Speech Server
MPS 500
MPS 1000
193