System Configuration and Setup
Table 6-4 Serial Line Keyboard Commands
Graphics Line
Commands
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
Insert
Delete
Backspace
ESC
Using a VGA Controller Other Than the Standard On-Board VGA
When the system is configured to use a PCI- or EISA-based VGA controller instead of the
standard onboard VGA (Trio64 PCI), consider the following:
•
The VGA jumper (J27) on the motherboard must be set to disable (off).
•
The console environment variable should be set to graphics.
•
With multiple VGA controllers, the system will direct console output to the first
controller it finds.
6–40 DIGITAL Server 3300/3300R
Serial Line
Commands
CTRL +A
CTRL +B
CTRL +C
CTRL +D
CTRL +E
CTRL +F
CTRL +P
CTRL +R
CTRL +T
CTRL +U
CTRL +V
CTRL +W
CTRL +H
CTRL +[