First-Time Setup - Digital Equipment 3300R Service Manual

First-Time Setup

Before you can dial in remotely through the RMC modem port or enable the system to call
out to a remote operator in response to system alerts, several RMC strings and parameters
must be set. Use the following procedure to set up RMC strings, password and parameters;
and to send out a test alert to verify the modem strings are set correctly.
1. From the local console terminal, enter the RMC escape sequence at the SRM prompt.
The default escape sequence is ^[^[rmc. This is equivalent to <Esc><Esc>rmc,
where <Esc> is the escape key on a PC keyboard.
You can also enter the RMC from the local graphics monitor by entering the rcm
command at the SRM console prompt, and then entering the escape sequence. When
finished accessing the RMC from the graphics monitor, enter the reset command to
restore the RMC and SRM consoles.
2. Using the RMC command set init, assign the modem initialization string appropriate
for your modem. Some typical initialization strings are:
Modem
Motorola 3400 Lifestyle 28.8
AT &T Dataport 14.4/FAX
Hayes Smartmodem Optima 288
V-34/V.FC + FAX
Refer to your modem documentation for more information on its initialization strings.
3. Using the RMC commands set dial and set alert, assign a dial string to be called
when the RMC detects an alert condition, as well as a string to be used with a paging
service, usually a call-back number for the paging service.
When an alert is sent, the dial string and alert string are concatenated and sent to the
modem. Note that the dial and alert strings must be in the correct string format for the
attached modem. If a paging service is to be contacted, then the dial and alert strings must
include the appropriate modem commands to dial the number, wait for the line to connect,
and send the appropriate touch tones to leave a pager message. Elements of a dial and
alert string are provided in Table 4-1.
Server Management Console
Initialization String
at&f0e0v0x0s0=2
at&f0e0v0x0s0=2
at&fe0v0x0s0=2
DIGITAL Server 3300/3300R 4–5