Set And Show (Environment Variables) - Digital Equipment 3300R Service Manual

System Configuration and Setup

set and show (Environment Variables)

The environment variables described in Table 6-1 are typically set when you are
configuring a system.
Syntax:
set [-default] [-integer] -[string] envar value
NOTE: Whenever you use the set command to reset an environment variable, you
must initialize the system to put the new setting into effect. You initialize the
system by entering the init command or pressing the Reset button.
Example:
show envar
Arguments:
envar
value
Options:
-default
-integer
-string
Examples
>>> set console graphics
>>> show console
console graphics
6–10 DIGITAL Server 3300/3300R
The name of the environment variable to be modified.
The value that is assigned to the environment variable. This may be
an ASCII string.
Restores variable to its default value.
Creates variable as an integer.
Creates variable as a string (default).