Table 2-6 Control Panel Leds - Digital Equipment 3300R Service Manual

Power-Up Diagnostics and Display
Table 2-6 describes the LEDs.

Table 2-6 Control Panel LEDs

Power OK
(green)
Off
Off
On
On
NOTE: To power up or reset without executing the NVRAM script or initiating an
automatic operating system boot, power up or reset with the Halt button
depressed.
2–18 DIGITAL Server 3300/3300R
Halt
(amber) Status
Off System powered-off using control panel Power button or
no AC power is present.
On System power is enabled using the control panel Power
button, but the system has been powered off by one of the
following:
Remote management console command
•
System software
•
Fan failure
•
Overtemperature condition
•
Power supply failure
Off System is powered-on and is not in a halt state.
On System is powered-on and the Halt button is pressed or a
halt in command has been issued at the remote
management console.