Show Device; Figure 6-2 Device Name Convention - Digital Equipment 3300R Service Manual

System Configuration and Setup

show device

The show device command displays the console bootable devices and controllers in the
system. The device name convention is shown in Figure 6-2.

Figure 6-2 Device Name Convention

dka0.0.0.0.0
Channel Number:
Bus Node Number:
Device Unit Number:
Syntax:
show device [device_name]
Argument:
[device_name]
6–8 DIGITAL Server 3300/3300R
Hose Number: 0 For DIGITAL Server 3300/3300R Systems
Logical
Slot Number: For EISA options---Correspond to EISA option physical slot numbers (1 - 3)
For PCI options:
Slot 5 = SCSI controller on system backplane
Slot 6 = Onboard graphics adapter
Slot 7 = PCI to EISA bridge chip
Slots 11--14 = Correspond to physical PCI option slots:
- Bus 1 (EISA devices) are reported as 1000, 1001, and 1002
- Bus 2 (PCI devices) are reported as 2000, 2001, 2002, and so on
Used for multi-channel devices.
Bus Node ID
Unique device unit number
SCSI unit numbers are forced to 100 x Node ID
Adapter ID: One-letter adapter designator (A,B,C...)
Driver ID: Two-letter port or class driver designator:
DR--RAID-set device
DV--Floppy drive
EW--Ethernet port (TULIP chip, DECchip 21040)
PK--SCSI port, DK--SCSI disk, MK--SCSI tape
PU--DSSI port, DU--DSSI disk, MU--DSSI tape
The device name or device abbreviation. When abbreviations or
wildcards are used, all devices that match the type are displayed.
PCI11, PCI12, PCI13, and PCI14 (64-bit)
ML014321