FRU Removal and Replacement
Figure 7-22 Removing CPU Daughter Board
WARNING:
When installing the CPU daughter board, be sure to insert it straight and square, so as not
to damage the connector pins. Once the levers are in place and screwed closed, press in on
the front of the module to ensure that it is properly seated.
STEP 4: REMOVE AIRFLOW BAFFLE FROM THE MOTHERBOARD.
STEP 5: DETACH MOTHERBOARD CABLES, REMOVE SCREWS, AND
MOTHERBOARD.
7–28 DIGITAL Server 3300/3300R
CPU and memory modules have parts that operate at high
temperatures. Wait 2 minutes after power is removed before
handling these modules.
IP00044A