Set Password; Set User; Set Wdt - Digital Equipment 3300R Service Manual

Example:
RCM> set init
init> at&f0e0v0x0s0=2
RCM>

set password

The set password command allows the user to change the password that is prompted at the
beginning of a modem session. The password is stored in nonvolatile memory. The
maximum password length is 14 characters. The password is not echoed on the user's
terminal. The password must be set before access through the modem can be enabled.
Example:
RCM> set pass
new pass> **************
RCM>

set user

The set user command allows the user to set a string of up to 63 characters for system
identification or any desired message.
Example:
RMC> set user
user> System last serviced on 08/15/98
RMC>

set wdt

The set wdt command sets the time-out period for the system watchdog timer. Allowable
values are:
0 (disabled)
1 (10 seconds)
2 (20 seconds)
.
.
.
9 (90 seconds)
Server Management Console
DIGITAL Server 3300/3300R 4–17