Set Tt_Allow_Login - Digital Equipment 3300R Service Manual

System Configuration and Setup

set tt_allow_login

The setting of the tt_allow_login environment variable enables or disables login to the
SRM console firmware on alternative console ports.
Syntax
set tt_allow_login [0,1]
Arguments:
1 Enables login on alternative console ports (default setting).
If the console output device is set to serial, you can log in on the COM1
(MMJ) port, COM2 port, or the graphics monitor.
If the console output device is set to graphics, you can log in through either
the primary graphics monitor or the COM1 (MMJ) or COM2 console ports.
0 Disables login on alternative console ports.
Whenever you change the value of this environment variable, you must initialize the
system with the init command.
Example
>>> set console serial
>>> set tt_allow_login 1
>>> init
6–38 DIGITAL Server 3300/3300R