CPU Daughter Board (J1 Jumper)
Figure 8-4 shows the system default setting for the J1 jumper on the CPU daughter board.
For information on the fail-safe loader, which is activated through the J1 jumper, refer to
Chapter 2.
Figure 8-4 Jumper J1 on the CPU Daughter Board
Bank
0
1
2
3
4
5
6
7
Jumper Setting Function
Standard boot setting
Power up with backup cache disabled: Allows the system to run despite
bad B-cache until a replacement CPU board is available.
Power up to the fail-safe loader with backup cache disabled.
Mini console setting (Internal use only)
Mini console setting (Internal use only)
Mini console setting (Internal use only)
Mini console setting (Internal use only)
Fail-safe loader setting: Attempt to boot from the fail-safe loader
diskette at power-up.
Default Jumper Settings
J1
0 1 2 3 4 5 6 7
DIGITAL Server 3300/3300R 8–5
J1
IP00070C