10. For each antenna, loosen the knurled ring at the base of the antenna (see
11. Connect one end of the PoE 100BaseT Ethernet cable to the 100/1000 Ethernet
Checking LED Activity
Access point status LEDs are provided on the Ethernet connector and on the face of
the AP150.
AP150 Status LEDs
Four status LEDs on the face of the AP150 also light, as shown in
.
© 2010 Meru Networks, Inc.
Figure
28), point the antenna straight down, then retighten the ring.
connector, shown in (see
Figure
29).
Checking LED Activity
Figure
33.
Status LEDs
Installing AP150 83