Meru Networks AP300 Installation Manual page 76

Installing the Access Points
Note:
Caution!
mistakenly be plugged into the Console port.
Mounting Below a Suspended Ceiling
The optional suspended ceiling mounting kit allows the AP200 mounting bracket to
attach to suspended ceiling T-rails (see
Note:
to attach the AP200 to the mounting bracket.
Figure 21: Mounting the AP200 to a Suspended Ceiling Rail
To mount an AP200 below a suspended ceiling:
1. Determine the location on the ceiling rail where the AP will be mounted and
2. Place each of the two caddy fasteners on the ceiling T-rail and twist to attach to
3. Adjust the distance between the caddy fasteners by using the mounting bracket
62 Meru Access Point Installation Guide
For the AP201 and AP208 access point, a shielded Cat 5e (or greater) Ethernet
cable must be used in order to comply with international electromagnetic
emissions limits.
Be sure to connect the Ethernet cable to the Ethernet port; the cable can
To comply with NEC code, attach a grounding wire to any of the screws used
Keps nuts with attached
locking washer
remove the ceiling tiles.
the rail.
holes as a guide.
Figure 21).
Suspended ceiling T-rail
Caddy fastener(s)
Plastic spacer(s)
Mounting bracket
© 2010 Meru Networks, Inc.