Meru Networks AP300 Installation Manual page 83

AP200 LED Descriptions
LED
RF 2
RF 1
Status
Power
AP200 Controller Status Information
State
Attempting to
discover Controller
Connected
Authenticated
© 2010 Meru Networks, Inc.
Function
The status LED for Radio 2 is a follows:
off—no radio present
yellow—radio initializing
red—radio failure
solid green—radio OK
blinking green—radio activity
The status LED for Radio 1 is a follows:
off—no radio present
yellow—radio initializing
red—radio failure
solid green—radio OK
blinking green—radio activity
AP-Controller operational status (see
green—presence of power
Interpretation
In the process of discovering the
controller. The AP is connected but not
associated with the controller. If the AP
does not associate with the controller
after a period of time, verify that the
connection between the AP and the
switch or the switch and the controller
is unbroken.
Normal operation without security.
Normal operation with security.
Checking LED Activity
Table )
AP200 LED Cycle
Green/Red/Blue/R
ed
Blue/Blue/Blue/Re
d
Blue/Blue/Blue/Re
d, for 2 seconds.
a
Blue blink
Installing AP200 69