Installing Ap320I; Safety Precautions; Chapter 3 Installing Ap320I - Meru Networks AP300 Installation Manual

AP320i is supported by System Director versions 3.6.1 and greater, but full support begins with System
Director release 4.0. Because of this, when using AP320i with System Director 3.6.1, the unit shows as
an AP300, for example AP320 instead of AP320i. All AP320i units still function correctly, they just
display as AP300 because AP320i did not exist when System Director 3.6.1 was released.
This chapter describes how to install and configure an AP320i. It contains the following sections:

Safety Precautions


Unpack the AP320i

Determine Power Requirements

Installation Requirements


Installing AP320i


Check AP320i LED Activity

Where to Go From Here

Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
If an optional power supply is used, it must be one supplied by Meru Networks.
The AP320i is only intended for installation in Environment A as defined in IEEE 802.3af. All intercon-
nected equipment must be contained within the same building, including the interconnected equip-
ment's associated LAN connection.
© 2010 Meru Networks, Inc.
Safety Precautions
Chapter 3
Installing AP320i
Installing AP320i
37