Meru Networks AP300 Installation Manual page 108

Installing the Access Points
Figure 40: Connect OAP180 Antenna Cables
5 GHz N-type
Connector (5G-1)
4. Apply weatherproofing tape to the antenna connectors to help prevent water
Note:
attached for weather protection.
Follow these steps to attach the Ethernet cable and ground wire:
1. Using the included cable, attach the Ethernet cable to the Ethernet port on the
Note:
loss is needed. During periods of lightning activity, do not connect or disconnect
cables or otherwise work with the OAP180.
Figure 41: Attach Ethernet Cable to OAP180
Ethernet
Cable
94 Meru Access Point Installation Guide
5G-2 5G-1
2.4G-2
2.4 GHz N-type
Connector (2.4G-1)
entering the connectors.
When not using antenna connectors on the OAP180, keep the covers securely
OAP180.
Use only the provided Ethernet cable. Do not shorten this cable as the path
Console Port
Console PoE
Ground Wire
2.4G-1
RF Coaxial
Cable
PoE (Ethernet) Port
5 GHz External
High-gain Panel
Antenna
2.4 GHz External
Omnidirectional
Antenna
© 2010 Meru Networks, Inc.