Meru Networks AP300 Installation Manual page 57

Mount AP320i On a Suspended Ceiling
AP320i ships ready to mount on a suspended ceiling; the attached bracket clips to a ceiling rail.
To mount an AP320i below a suspended ceiling, follow these steps:
1. Determine the location on the ceiling rail where the AP will be mounted and remove the ceiling
tiles.
2. Align the mounting bracket with the slots indicated in
Figure 17: Install AP320i Below a Suspended Ceiling
AP300i Mounting bracket
3. Press down on the tab indicated in
4. Connect one end of the CAT5 (or greater) Ethernet cable to the 100/1000 Ethernet connector.
Caution!
mistakenly be plugged into the Console port; if you do this, the AP won't power up.
Figure 18: AP320i Ethernet Port on the Right
© 2010 Meru Networks, Inc.
T-bar
(in ceiling)
Press this tab down
with T-bar.
Figure 17 and rotate the AP320i into place.
Be sure to connect the Ethernet cable to the Ethernet port. The cable can
CON LAN
console Ethernet
Figure 17 below.
5V DC
Installing AP320i
Installing AP320i
43