This chapter describes how to physically install an AP150. It contains the following
sections:
Safety Precautions
Unpacking the AP150
Installation Requirements
Installing the Access Points
Where to Go From Here
Checking LED Activity
Safety Precautions
IMPORTANT—Read and follow the instructions in Appendix , "Regulatory Information"
on page 109 before installing and operating this product.
This product is intended to be supplied by a UL Listed power supply, marked Class 2
or LPS, and rated minimum 5 Vdc, 3A.
Caution!
in the plenum space.
Unpacking the AP150
Confirm that the AP150 shipping package contains the AP150 access point with
attached mounting bracket.
© 2010 Meru Networks, Inc.
The AP150 is not certified for plenum installations, and should not be installed
Safety Precautions
Chapter 5
Installing AP150
Installing AP150 71