Meru Networks AP300 Installation Manual page 84

Checking LED Activity
State
Disconnected
Standalone Remote
Downloading
Error State
70 Meru Access Point Installation Guide
Interpretation
Access point was once connected to a
controller and configured by the
controller, but can no longer find that
controller
Access point is operating in a
standalone mode
Downloading image or configuration
from the controller
Access point is in an error state.
Call Meru technical support
a. The AP200 LEDs cycle from bright to dim for each "blink."
AP200 LED Cycle
Green/Purple/
Green/Purple
Purple blink
Green/Blue
Green/Blue
Red (blinking or
solid)
© 2010 Meru Networks, Inc.