Figure 30: AP150 Bracket
3. Drill holes at the locations you marked:
—
—
4. If you are using plastic anchors, install them in the holes.
5. Screw in the screws most of the way, so that the screw head is about 1/16 of an
6. Mount the bracket on the screws, placing the circular portion of the keyhole
7. Tighten the screws to secure the bracket.
8. Align the AP150 with the bracket thumbscrews (see
© 2010 Meru Networks, Inc.
Suspended ceiling
cable access
3/16-inch holes if you are using plastic anchors
1/8-inch holes if you are using only the screws
inch from the wall.
mounts over the screw heads and sliding the bracket down.
thumbscrews to attach the bracket.
Wall cable access
Installing the Access Points
Figure
31) and tighten the
Installing AP150 79