Unpacking The Oap180; Installation Requirements - Meru Networks AP300 Installation Manual

Unpacking the OAP180

Unpacking the OAP180
Figure 34: OAP180 Outdoor Access Point
Top panel view
N-Type External
Antenna Connector
(5 GHz)
Confirm that the OAP180 shipping boxes contain the following items:
OAP180 Outdoor Access Point

Wall/Pole Mount Hardware Kit for mounting OAP180 to a 2" to 3" diameter steel

pole or tube or as part of a radio or tower structure
N-Type Female connectors for external antennas

Outdoor CAT5 Ethernet cable—100 feet. Be sure to include this (maximum) 100

foot cable in link path calculation; the PoE does not resend the traffic, it only
provides power.
Power injector with power cord


Installation Requirements

In addition to the hardware supplied by Meru Networks, you need the following:
Required
Standard Ethernet cable to connect the power injector to a switch or controller

Antennas (sold separately)

Ground wire for the OAP180 Optional
RF coaxial cable to connect the antenna to the OAP180

88 Meru Access Point Installation Guide
2.4G 5G 5G 2.4G
N-Type External
Antenna Connector
(2.4 GHz)
Bottom panel view
Console
Console
Port Cover
Attachment
Console Ethernet/PoE
Port Connector
PoE
Water-Tight
Test Point
© 2010 Meru Networks, Inc.