Meru Networks AP300 Installation Manual page 60

Installing AP320i
6. Connect one end of the Ethernet cable to the switch and the other end to the AP320i Ethernet port.
Caution!
mistakenly be plugged into the Console port; if you do this. the AP won't power up.
Figure 21: AP320i Ethernet Port on the Right
7. If you are not using a PoE device, connect an external power supply to the power connector and
plug it into the wall.
8. Align the tabs on the wall bracket with the tabs on the ceiling bracket and then rotate the AP320i
clockwise to secure it to the wall. See
Figure 22: Mount AP320i on a Wall
Tabs
Wall bracket
(mounted
on wall)
46 Meru Access Point Installation Guide
Be sure to connect the Ethernet cable to the Ethernet port. The cable can
CON
console Ethernet
Align tabs on Wall bracket
with tabs on the Mounting
bracket.
Twist to secure the
AP300i to the wall.
Mounting
bracket
(attached)
LAN 5V DC
Figure 22 below.
AP300i
© 2010 Meru Networks, Inc.