Installing The Access Points; Selecting A Location - Meru Networks AP300 Installation Manual

AP150 Required Tools
Installation Type
Horizontal mounting
Vertical mounting over a wall stud
Vertical mounting on sheetrock
Horizontal mounting below a
hanging ceiling
Mounting above a hanging ceiling

Installing the Access Points

Selecting a Location

The AP150 requires a location that meets the following criteria:
Relatively unobstructed access to the stations the AP serves

Power over Ethernet (PoE) connection to the network switch servicing the

controller.
APs can obtain their power from 802.3af st andard Power over Ethernet (PoE)-compat-
ible network switch or PoE power injector installed between the switch and the
AP150.
© 2010 Meru Networks, Inc.
AP150 and AP300 work with all switches that support STANDARD 802.3af.
Installing the Access Points
Tools Required
None
Drill

1/8"drill bit

Screwdriver

1/8"Allen wrench

Drill

3/16" drill bit

Screwdriver

1/8"Allen wrench

Screwdriver

Wrench or pliers

1/8"Allen wrench

Wrench or pliers

Screwdriver

1/8"Allen wrench

Installing AP150 75