Meru Networks AP300 Installation Manual page 75

Figure 19: Aligning the AP200 with the Bracket
Mounting bracket attached to wall
Figure 20: Sliding the AP200 into the Bracket
8. For external antennas, loosen the knurled ring at the base of each antenna (see
9. Connect one end of the PoE 100BaseT Ethernet cable to the 100/1000 Ethernet
© 2010 Meru Networks, Inc.
Figure 16), point the antenna straight up, then retighten the ring.
connector, shown in Figure
Mounting bracket
17.
Installing the Access Points
Installing AP200 61