Table of Contents
Advertisement
Multiple Ranges
SpectraView Navigation
Thermo Scientific
Figure 29. Area of Interest Fit to the Display
The view of the spectrum will change to show only the area of interest.
SpectraView can display any individual spectra, including those obtained from multiple
Ranges (filters) if you are using more than one Range. Use the NAV Menu to select which
spectrum to view.
The Spectra1 choice will display the spectrum produced by the first Range.
The Spectra2 choice will display the spectrum produced by the second Range.
Use the left button on the 4-way touch pad to expand the spectrum, centered on the position
of the cursor.
Use the right button on the 4-way touch pad to contract the spectrum, centered on the
position of the cursor.
6
Data Management
Viewing Data
Niton XL2 Analyzer User's Guide
89
Advertisement
Table of Contents
