Table of Contents
Advertisement
Spectrum:On/Spectrum:Off
Activating and Deactivating the Live Spectrum
Thermo Scientific
Enables you to average different readings together from this analysis backward. Select the Avg
Back option to initiate backwards sample averaging. Avg Back will take the number of
readings you select and average their analytical results. The range is counted from the last
reading backward by the number of readings selected. If your last reading was #15, selecting 3
would average readings #13, 14, and 15. The average is calculated, displayed, and stored into
memory as the next sequential reading number, in this case, #16.
The range number is selected using a virtual numeric keypad on your analyzer similar to the
keypad used for login. Select the digits in the range number from the keypad, then select the E
button to enter the number. The C button will clear all, and the "<" button will clear the last
digit entered. The average will automatically be displayed.
Figure 8.
The Virtual Numeric Keypad
Note You cannot average readings taken in different modes. Doing this will generate an error.
The Tools Menu contains a toggle option to display live spectra as sample analysis occurs.
From the Tools Menu, select the Spectra:On button to turn the Spectrum feed on. Once the
spectrum is displayed, selecting Spectra:Off from the Tools Menu will stop the live spectrum
display.
8
Advanced Settings
Tools Menu Options
Niton XL2 Analyzer User's Guide
151
Advertisement
Table of Contents
