6
Data Management
Managing Libraries
Library Name
Alloy Name
Element to be Edited
Minimum Percentage
100
Niton XL2 Analyzer User's Guide
Figure 43. The Element Specification Screen
This is the name of the library you are editing. Make sure you are editing the correct library
before proceeding further.
This is the name of the alloy you are editing. Make sure you are editing the correct alloy
before proceeding further.
This is the element you need to edit for this alloy.
This is the lowest amount of the element in question you want to be in the alloy. If the
element in the analyzed sample is any lower, the sample will not be recognized as this alloy.
Selecting the element minimum will open the Minimum Editor.
Thermo Scientific