Add/Remove (Toggle); Set Pass/Fail Screen - Thermo Scientific XL2 User Manual

Add/Remove (Toggle)

Save
Close
Pass
Fail
Thermo Scientific
Figure 10.

Set Pass/Fail Screen

Select alloys from the Available list and then the Add Button to move the alloy to the Selected
List. Select alloys from the Selected list and then the Remove Button to remove the alloys
from the Selected List.
Select the Save Button to save these criteria.
Select the Close Button to exit without saving.
Select the Pass Single button to initiate Pass Mode. Use Pass Mode when you have a desirable
match. If the alloy being analyzed matches one of the alloys in the selected list, the alloy will
Pass the analysis.
Select the Fail button to initiate Fail Mode. Use Fail Single Mode when you have an
undesirable match. If the alloy being analyzed matches one of the alloys in the selected list, the
alloy will Fail the analysis.
8
Advanced Settings
Tools Menu Options
Niton XL2 Analyzer User's Guide 153