Table of Contents
Advertisement
7
Connectivity
Using a USB Cable to Connect Your Analyzer
Changing the Bluetooth Device Type
Disable/Enable Button
Close Button
Using a USB Cable to Connect Your Analyzer
To connect the XL2 XRF Analyzer to your PC using the USB cable:
114
Niton XL2 Analyzer User's Guide
Figure 52. Bluetooth Config Screen
Selecting the Config Button will load the Config Screen. This screen enables you to se the
name of the currently selected Bluetooth device, change the type of device, see that device's
COD Number, and see that device's MAC Address.
Select the Down Arrow button next to the Type field to change the type of device connected.
Select the proper type from the drop down menu. Select the Save button to save this
configuration. Select the Close Button to exit without saving.
Figure 53. Changing Bluetooth Device Type
Selecting the Disable Button will disable Bluetooth neetworking and change the button to
Enable. Selecting the Enable Button will restart Bluetooth networking and change the button
back to Disable.
Select the close button to exit from Bluetooth setup.
1. Insert the Standard USB connector on the USB cable into a USB port on your computer.
Thermo Scientific
Advertisement
Table of Contents
