Specs Information
Instrument Specific Serial Number
Model Number
Date And Time
SW Version
Thermo Scientific
Figure 8.
The Specifications Screen
On the Specs Screen, standard information on the state of your analyzer is shown for your
reference. This information should be reported to Service if there is a problem.
The following is the information supplied on the Specs Screen:
This is located in the left part of the blue band at the top of the screen.
This is located in the right part of the blue band at the top of the screen.
This is the current Date and Time. This is particularly important for date stamping.
This is the currently loaded software version, which should be reported to Service if there
is any problem.
8
Learning More, Service, and Support
Tips and Troubleshooting
Niton XL2 Analyzer User's Guide
133