Table of Contents
Advertisement
Using Mining Cu/Zn Mode
Thermo Scientific
1. Clean the sample to be analyzed so it is free of all surface contamination.
2. Place the analyzer so that the sample covers the analysis window.
3. Select the Mode icon.
a. Select Mining Cu/Zn from the Mode Menu.
4. Select the Analyze icon.
a. Select the Data Button if you wish to do any data entry.
b. Enter the data on the sample using the Virtual Keyboard.
5. Initiate the analysis.
6. When the sample has been sufficiently analyzed, stop the analysis.
7. View the composition returned.
8. Remove the sample.
4
Basic Operation
Analysis Modes
Niton XL2 Analyzer User's Guide
43
Advertisement
Table of Contents
