Sanding Disc - Thermo Scientific XL2 User Manual

5
Common Operations
Metal Sample Prep
Figure 2.

Sanding Disc

Before attaching the grinder and sanding disc as pictured below, first remove the battery to
disable the grinder. Then insert the shaft of the disc holder into the drill and securely tighten
the chuck. Next, attach the appropriate sanding disc. The method of attachment will vary
depending upon the type of fastener on the sanding disc (snap-on or twist connectors).
Reinstall the battery and prepare for use.
Thermo Scientific Niton XL2 Analyzer User's Guide 53