Adjustment Elements - Siemens 13-xx-ST-SBT Series Product Data

11 Operating unit with PMI & mainboard FCM2027

Adjustment elements

LED Color Function
H53 Yellow 'CPLD fail' (reset and watchdog logic)
H54 Red
'TEMP', CPU module excess
temperature indicator
H61 Yellow 'SPEED', Ethernet transmission
indicator
H842 Green 'LINK' control indicator
11.4
86
Building Technologies
Fire Safety
Adjustment elements
S32: Reset key
The S32 button has a number of functions depending on how long it is pressed
for and whether it is pressed in combination with other buttons.
Operation
Press for <2 s
Press for >2 s
Press S32 + 'Reset' or
'Acknowledge' (front
operating buttons) at the
same time
Restore factory settings
Operation
Press S32 + 'Reset' (front
operating button) at the
same time for >2 s
You will find detailed instructions in document 009052. See chapter 'Applicable
documents'.
Updating the firmware
Operation
Press S32 + 'Acknowledge'
(front operating button) at
the same time for >2 s
You will find detailed instructions in document 009052. See chapter 'Applicable
documents'.
Condition Meaning
Off Normal operation
On Logic unit failed; replace component or
contact hotline
Not used
Off Data transfer at 10 Mbit/s
On Data transfer at 100 Mbit/s
Off No Ethernet connection
On Ethernet connection established
Function
Station is shut down and restarted in a controlled manner.
This procedure takes up to 5 minutes.
Station is shut down and restarted immediately. This may
lead to data loss. This procedure takes up to two minutes.
Restore factory settings or update firmware.
Function
Station is started in Restore factory settings mode.
A short peeping sound confirms the function is being
executed.
Function
Station's firmware is updated.
A short peeping sound confirms the function is being
executed.
008837_q_en_--
14.05.2012